Manual-hydraulic flat plate valves are shut-off devices integrating dual operation modes of manual and hydraulic, widely applied in industries such as petroleum, natural gas, and chemical engineering. With parallel-sliding gate plates as the core components, under normal working conditions, these valves can achieve remote and automated operation through a hydraulic control system. The hydraulic power drives the valve stem, enabling the gate plates to open and close quickly and smoothly, precisely controlling the flow of fluids. When encountering malfunctions in the hydraulic system or special working conditions, the operation mode can be switched to manual. By turning the handwheel, the gate plates are driven by human force, ensuring the reliable operation of the valves.

Manual flat plate valves are commonly used shut-off devices in industries such as oil and natural gas, which are opened and closed by manual operation. With a parallel - sliding gate as the core component, these valves rotate the handwheel to drive the valve stem, moving the gate along the sealing surface of the valve seat to open and close the fluid passage. ​

In the realm of fluid control systems, the lift check valve stands as a paragon of precision engineering, ensuring media flows in one direction with unmatched reliability. This valve, akin to a meticulous gatekeeper, employs a vertical motion mechanism to create an impermeable barrier against backflow, making it indispensable in applications demanding tight sealing and precise flow control.

In the intricate network of fluid control systems, swing check valves stand as indispensable sentinels, ensuring the unidirectional flow of media with steadfast reliability. These valves, characterized by their unique design and operational mechanism, have become a cornerstone in various industrial and commercial applications, safeguarding pipelines and equipment from potential damage caused by backflow. The defining feature of swing check valves lies in their hinged disc mechanism. The valve disc, which is mounted on a hinge or trunnion near the top of the valve body, swings freely to open and close. When fluid flows in the forward direction, t

In the intricate landscape of fluid control systems, the needle throttle valve stands as a paragon of precision engineering. Designed to modulate fluid flow with exceptional accuracy, this specialized valve plays a pivotal role in applications where minute adjustments can mean the difference between optimal performance and system failure.   The defining feature of the needle throttle valve is its slender, tapered needle-shaped plunger, which mates with a precisely machined seat. This configuration allows for incremental flow control over a wide range of rates. As the valve stem is rotated, the needle moves axially, gradually altering the annular space between th

In the hidden corners of fluid conveying systems, dual - plate check valves act like silent but loyal guards, ensuring the unidirectional flow of media with their unique designs and reliable performances. As a member of the check valve family, they hold an indispensable position in various industrial scenarios and civil facilities due to their innovative structures and excellent adaptability. The core structure of a dual - plate check valve consists of two valve discs, a valve seat, a spring, and a valve body, which makes it st

In the complex pipeline system of the industrial field, valves are like precision controlled "blood vessel switches", silently guarding the orderly flow of fluids. This seemingly inconspicuous mechanical device is actually a key node connecting pipelines, equipment, and processes, constructing the cornerstone of fluid control in modern industry with diverse forms and functions. 1、 Function and Classification: Unlock Multiple Control Scenarios The core mission of valves is to achieve precise control of parameters such as on/off, flow rate, pressure, and flow direction of fluids (liquids, gases, slurries, etc.) through opening, closing, or adjusting. According to functional characteristics, its family can be subdivided into multiple branches: Cut off type: such as gate valves and globe valves, with a decisive "one size fits all" attitude, to achieve rapid fluid flow, commonly used in pipeline scenarios that require complete isolation of the medium. Regulating class: Ball valves and butterfly valves are like nimble "flow regulators" that finely control the flow rate of fluids by rotating the valve core angle, demonstrating their skills in chemical processes that require precise proportioning. Safety class: Safety valves are like loyal "guardians", automatically opening to release pressure when the system pressure exceeds the critical value, building a strong safety line for equipment such as boilers and pressure vessels. Special function category: With its unique one-way flow design, the check valve acts like a "one-way traffic police" in the fluid world, preventing system failures caused by medium backflow; The drain valve focuses on "removing dampness and water", efficiently removing condensed water from the steam pipeline, while tightly locking the

In the field of industrial fluid control, electric V-shaped ball valves stand out with precision and efficiency. It is centered around a sphere with a V-shaped notch, paired with an integrated electric actuator to achieve intelligent control. When the control system sends out a 4-20mA signal, the servo motor drives the ball to rotate, and the flow area between the V-shaped notch and the valve seat changes accordingly, completing the linear adjustment of fluid flow rate. ​ The V-shaped structure endows this ball valve with two major characteristics: one is an approximately equal percentage flow characteristic, with an adjustable ratio of 300:1, which can accurately control fluid transport from small to large quantities; The second is the shear effect formed by the edge of the incision and the valve seat, which can easily cut off impurities such as fibers and particles, and is suitable for high viscosity and solid containing media such as pulp and slurry. In addition, the positioning accuracy of the electric actuator is as high as ± 1%, with rapid response. It also supports bus protocols such as HART to achieve remote intelligent monitoring. ​ With the advantages of strong shear, high-precision adjustment, and low maintenance, electric V-ball valves are widely used in industries such as papermaking, chemical, food, and metallurgy. Whether it is pulp flow control or cutting and conveying of corrosive materials, it can operate stably and provide reliable guarantee for industrial production. ​ This article summarizes the core points of electric V-shaped ball valves. If you want to add technical details, application cases, or adjust the style and word count of the article, feel free to let me know at any time.

In the field of industrial fluid control, pneumatic V-ball valves are highly favored for their efficient and precise adjustment performance. It takes a sphere as the core component, with V-shaped notches machined on the sphere, and is paired with a pneumatic actuator to form a responsive and precise fluid regulation system. When working, compressed air drives the pneumatic actuator to rotate the sphere, and the flow area between the V-shaped notch and the valve seat changes accordingly, thereby achieving linear adjustment of the medium flow rate. Its unique V-shaped structure not only generates shear force on the fluid during the opening process, effectively cutting off fibrous and granular media, but also enhances the sealing performance with sharp cutting edges, achieving zero leakage standard when closed, and the sealing level can reach ANSI B16.104 Level VI. ​ This ball valve has excellent regulating characteristics, with flow characteristics that are approximately equal in percentage, and an adjustable ratio of up to 300:1, which can accurately control the transportation of small flow rates to large amounts of fluids. At the same time, the pneumatic drive responds quickly and has a short action time, making it suitable for working conditions with rapid opening and closing and frequent adjustment. In addition, its compact structure, wear resistance, and erosion resistance are widely used in industries such as papermaking, food, chemical engineering, and metallurgy. Whether it is pulp conveying, syrup blending, or flow control of high viscosity materials and granular media, it can play a stable role and provide reliable guarantees for industrial production. ​ The above article presents the core highlights of pneumatic V-shaped ball valves. If you want to add cases, compare with other va

In the field of corrosive fluid control, pneumatic fluorine lined regulating valves stand out with their unique design and efficient performance. It is based on a metal valve body, and the internal and key components are fully lined with fluoroplastics (such as F4, F46). This material has strong chemical inertness and can resist almost all strong acids, alkalis, and oxidants. It can easily cope with extreme medium environments with pH values of 0-14, providing long-term anti-corrosion protection for the valve. ​ Unlike electric control valves, pneumatic fluorine lined control valves use compressed air as a power source and receive air source signals (such as 20-100kPa) from the control system through pneumatic actuators. After precise conversion by a locator, the valve core is driven to move, achieving precise adjustment of medium flow rate and pressure. This adjustment method responds quickly, operates smoothly, and can reliably operate even under harsh conditions such as high temperature, high humidity, flammability, and explosiveness, with excellent explosion-proof performance. ​ With its corrosion resistance, high reliability, and fast response characteristics, pneumatic fluorine lined regulating valves are widely used in industries such as chemical production, pharmaceuticals, environmental wastewater treatment, metallurgy, etc. Whether it is the transportation of reactor materials or the addition of wastewater treatment agents, it can significantly extend the service life of equipment and reduce maintenance costs while ensuring fluid stability control. It is an indispensable and important component in industrial automation control. ​ The above content summarizes the key information of pneumatic fluorine lined regulating valves. If you want to add more technical details,

The electric fluorine lined regulating valve can be regarded as the "safety guard" for controlling corrosive fluids. It is made of cast iron, cast steel or stainless steel as the valve body substrate, and the internal and key components are fully covered with fluoroplastics (such as F4, F46). With the strong chemical stability of fluoroplastics, it can easily resist strong acids such as sulfuric acid and hydrochloric acid, strong alkalis such as sodium hydroxide, and strong oxidants. It is resistant to pH range covering 0-14, isolating the contact between the medium and metal from the source and eliminating corrosion hazards. ​ In working mode, the regulating valve is equipped with an integrated electric actuator. After receiving control signals such as 4-20mA, the servo motor quickly drives the reducer to accurately adjust the flow area between the valve core and valve seat, achieving precise control of flow rate, pressure or temperature. At the same time, the position feedback device sends back real-time opening data, constructs closed-loop control, achieves positioning accuracy of ± 1%, and responds quickly to ≤ 15 seconds/full stroke. ​ With its characteristics of corrosion resistance, high-precision regulation, and low maintenance, electric fluorine lined regulating valves are indispensable in scenarios such as chemical reactor medium transportation, pharmaceutical industry drug ratio, environmental wastewater treatment agent addition, and lithium battery electrolyte flow control. In addition, its explosion-proof design is suitable for flammable and explosive environments, supports bus protocols such as HART, and combines safety and intelligence, providing reliable guarantees for industrial fluid control. ​ The above article outlines the core points of electric fluorine lined regulating val

In the field of industrial automation, self regulating valves are like intelligent managers that do not require external "command". With their unique working mechanism, they achieve precise control of fluid pressure, flow rate, temperature and other parameters. It abandons the traditional mode of relying on external energy sources (such as electricity and gas) to drive the regulating valve, cleverly utilizes the energy of the controlled medium itself, uses pressure, temperature and other signals as driving force, and drives the valve core action through the actuator to complete the regulating task. ​ Structurally, self operated regulating valves typically consist of actuators, regulating mechanisms, and detection devices. The actuator is the power core of the regulating valve, which can push the valve core to change the opening based on the feedback signal from the detection device; The regulating mechanism is in direct contact with the controlled medium, and adjusts the flow rate and pressure of the medium through changes in the flow area between the valve core and valve seat; The detection device constantly monitors the controlled parameters to ensure the accuracy of the adjustment. ​ The advantages of this type of regulating valve are very significant. Due to the absence of external energy, it not only reduces installation costs and maintenance difficulties, but also ensures stable operation in remote areas or places with inconvenient energy supply, greatly improving the adaptability and reliability of the system. In addition, its compact structure and sensitive response can quickly respond to changes in working conditions, effectively improving the stability and efficiency of industrial processes. ​ Self regulating valves are widely used in many industries such as chemical,

In the key link of industrial fluid control, pneumatic sleeve regulating valves have become the preferred equipment for many production scenarios due to their stable and reliable performance and excellent regulating ability. It uses compressed air as its power source, receives control signals through pneumatic actuators, and drives the sleeve valve core to move accurately, achieving efficient regulation of fluid flow, pressure, and temperature inside the pipeline, especially suitable for working conditions with high requirements for response speed and stability. ​ The unique sleeve structure is the core advantage of pneumatic sleeve regulating valves. The precisely designed throttling window on the sleeve can effectively disperse fluid pressure, reduce fluid erosion on the valve core, reduce vibration and noise during valve operation, and significantly improve service life; The combination of sleeve and valve core can provide various flow characteristics such as straight line and equal percentage, adapting to different process requirements and ensuring precise adjustment. In addition, the balanced valve core design enables the valve to easily overcome the unbalanced force of the medium and achieve sensitive and stable adjustment action even in high-pressure environments with the strong power of the pneumatic actuator. ​ In the petrochemical industry, pneumatic sleeve regulating valves can accurately control the feed flow of reaction vessels, ensuring stable chemical reactions; In the metallurgical industry, it is used for pressure regulation of high-temperature and high-pressure gases to assist in the safe operation of smelting processes; In the field of environmental protection, sewage treatment systems can stably regulate the amount of acid-base neutralizing agents added to improve treat

In the complex process of industrial automation production, electric sleeve regulating valves play an indispensable role as the core equipment for achieving precise control of fluid parameters. It is powered by an electric actuator and drives the sleeve valve core to move up and down by receiving standard control signals such as 4-20mA, thereby accurately adjusting the flow rate, pressure, and temperature of the fluid in the pipeline, meeting the refined control requirements under different working conditions. ​ The core advantage of electric sleeve regulating valve lies in its unique sleeve structure design. The uniformly distributed throttling windows on the sleeve can effectively disperse fluid pressure, reduce fluid flushing and vibration on the valve core, lower noise, and extend the service life of the valve; At the same time, the combination of sleeve and valve core can achieve various flow characteristics, such as straight line, equal percentage, quick opening, etc. Users can flexibly choose according to actual process requirements and accurately match different control curves. In addition, the valve adopts a balanced valve core design, where the medium pressure acts on the sleeve, greatly reducing the unbalanced force on the valve core. Even under high pressure differential conditions, stable and sensitive adjustment actions can be easily achieved. ​ In the petrochemical industry, electric sleeve regulating valves can accurately control the feed rate of the reaction kettle, ensuring stable chemical reactions; In the field of electricity, it is used for pressure regulation of steam pipelines to ensure the safe and efficient operation of power generation equipment; In the heating system, energy-saving heating is achieved by precisely regulating the hot water flow rate. It is worth m

In industrial environments where highly corrosive fluids demand precise control, the electric fluorine lined control valve emerges as a cutting-edge solution. Driven by an electric actuator, this valve combines automated intelligence with superior corrosion resistance, enabling accurate regulation of flow, pressure, and temperature in pipelines transporting aggressive media.​ Core Structure and Material Excellence​

Pneumatic Fluorine Lined Control Valve: Precision Control for Corrosive Fluids In industrial processes involving highly corrosive media, the pneumatic fluorine lined control valve stands out as a reliable solution for precise fluid regulation. Driven by compressed air, this valve utilizes a pneumatic actuator to position the plug or ball core, enabling accurate adjustment of flow rate, pressure, or temperature within pipelines. Its design prioritizes corrosion resistance and operational stability, making it indispensable in harsh chemical environments. Core Design and Material Advantages The valve’s wetted parts—including the body, trim, and seat—are lined with fluoropolymers such as PTFE (Teflon), FEP, or PFA. These materials offer: Exceptional Chemical Inertness: Resistance to concentrated acids (e.g., sulfuric acid, hydrochloric acid), alkalis, and organic solvents that would degrade traditional metal valves. Low Friction Coefficient: Smooth flow characteristics and minimal pressure drop, ensuring energy-efficient operation.

In industrial fluid control scenarios with high pressure, high temperature, and high corrosion, pneumatic triple eccentric butterfly valves stand out for their efficient and reliable performance, becoming a key equipment to ensure production safety and stability. It uses compressed air as its power source and drives the butterfly plate through a pneumatic actuator, accurately achieving fluid on/off and flow regulation. It responds quickly and has strong power, especially suitable for complex working conditions with frequent start stop and high control accuracy requirements. ​ The "three eccentric" structure of this butterfly valve is its core competitiveness. The axis of the valve stem is offset from the center of the butterfly plate, offset from the centerline of the valve body, and the sealing surface is offset in a conical shape. The triple eccentric design breaks the sealing limitations of traditional butterfly valves. When opened, the butterfly plate and valve seat quickly separate, reducing friction and wear; When closed, the sealing surface forms a metal hard seal or a soft hard composite seal through oblique compression, which can withstand pressures of up to 10MPa or more, with a leakage rate as low as almost zero, effectively preventing medium leakage. The valve body and butterfly plate are made of high-strength and corrosion-resistant materials such as stainless steel and duplex steel, and are treated with processes such as hard alloy welding. The temperature resistance range covers -196 ℃ to 600 ℃, and can withstand various media such as steam, strong acid, and natural gas with ease. ​ In the petrochemical industry, pneumatic triple eccentric butterfly valves can safely control the transportation of high-temperature heavy oil and corrosive chemical raw materials; As a key s

In harsh industrial conditions such as high temperature, high pressure, and strong corrosion, the sealing performance of fluid control equipment is crucial, and electric triple eccentric butterfly valves are the best solution to this problem. It is powered by an electric actuator and drives the butterfly plate to rotate flexibly by accurately receiving control signals, achieving fluid on/off and flow regulation. ​ The "three eccentricities" structure of the electric three eccentric butterfly valve is its core advantage. The first eccentricity causes the axis of the valve stem to deviate from the center of the butterfly plate, and when opened, the butterfly plate quickly disengages from the valve seat, reducing friction loss; The second eccentricity causes the axis of the valve stem to deviate from the centerline of the valve body, enhancing the pressure bearing capacity of the valve; The third eccentricity causes the sealing surface to deviate in a conical shape. When the valve is closed, the butterfly plate is tightly attached to the valve seat, forming a metal hard seal or a soft hard composite seal. Even when facing high pressures above 10MPa, it can achieve a nearly zero leakage sealing effect. At the same time, the valve body and butterfly plate are made of corrosion-resistant materials such as stainless steel and duplex steel, supplemented by hard alloy welding technology, which can work stably in the extreme temperature range of -196 ℃ to 600 ℃, and can handle various media such as steam, acid and alkali solutions, and natural gas with ease. ​ In the field of petrochemicals, it can safely control the transportation of high-temperature heavy oil and corrosive chemical raw materials; In the steam pipeline network of the power industry, precise adjustment of steam flow can ensure p

In the field of industrial fluid control in high-temperature environments, pneumatic high-temperature regulating valves have become indispensable core equipment due to their excellent performance. It uses compressed air as its power source, and precisely receives control signals through pneumatic actuators to drive the valve core to move up and down or rotate, thereby accurately adjusting the fluid flow rate, pressure, and temperature inside the pipeline. It responds quickly and controls stably, and can adapt to frequent operation requirements in high-temperature environments. ​ The design of this regulating valve fully considers high-temperature conditions, and the valve body is made of high-temperature resistant alloy steel or special ceramics, which can withstand temperatures of hundreds of degrees Celsius without deformation or damage; The sealing components are made of high temperature resistant materials such as graphite and metal wrapped gaskets, ensuring good sealing performance even at high temperatures and effectively preventing fluid leakage. In addition, the special insulation design and heat dissipation structure can reduce the impact of heat on the actuator, ensuring stable operation of the pneumatic system. ​ In the steam pipeline system of thermal power generation, pneumatic high-temperature regulating valves can accurately control steam flow and ensure power generation efficiency; In the high-temperature furnace fuel transportation process of the metallurgical industry, it can stably regulate the gas flow rate in high-temperature environments, helping the smelting process to proceed smoothly; In the cracking unit of petrochemical industry, facing complex working conditions of high temperature and high pressure, it is still possible to accurately control the material flow r

Electric high-temperature regulating valves are the core fluid control equipment for high-temperature industrial scenarios, playing a key role in metallurgy, power, petrochemicals and other fields with excellent performance. It is equipped with an intelligent electric actuator that can receive 4-20mA standard signals, enabling remote control and precise adjustment with an accuracy of ± 0.5%. The valve body is made of high-grade high-temperature resistant materials such as chrome molybdenum vanadium steel and Inconel alloy, and is equipped with special heat treatment processes to withstand extreme high temperatures above 800 ℃; The design of heat dissipation fins and insulation fillers effectively isolates heat conduction, ensuring stable operation of the actuator. Valve internals made of ceramics and hard alloys are not afraid of high temperature erosion and corrosion, and flexible graphite sealing gaskets ensure zero leakage. Whether it is steam flow regulation of power plant boilers or temperature management of metallurgical furnaces, electric high-temperature regulating valves have established a safe and efficient operating foundation for high-temperature industrial processes with their efficient and reliable performance.

Pneumatic low-temperature regulating valve is a reliable guardian in the field of low-temperature fluid control, powered by compressed air, specially designed for the transportation and regulation of cryogenic media such as -196 ℃ liquid nitrogen and LNG. This valve uses a pneumatic actuator to receive a 4-20mA standard signal, and accurately converts air pressure into valve core displacement through a locator. The response speed is less than 1 second, and the adjustment accuracy reaches ± 1%, achieving fast and stable control of flow and pressure. The valve body is made of 304L/316L stainless steel or nickel based alloy that has undergone cryogenic treatment, and can withstand extreme low temperature impact without brittle fracture; The sealing components are made of polytetrafluoroethylene (PTFE) or special rubber materials with excellent low-temperature performance, combined with a double sealing structure to ensure zero leakage. The design of the extended valve stem and insulation sleeve effectively isolates low-temperature conduction and avoids freezing damage to the actuator; Pneumatic drive has inherent explosion-proof characteristics and is suitable for low-temperature hazardous environments that are flammable and explosive. With the advantages of stability, reliability, and convenient maintenance, pneumatic low-temperature regulating valves are widely used in LNG receiving stations, air separation units, and other scenarios, building a solid barrier for the safe and efficient operation of low-temperature industrial processes.

Electric low-temperature regulating valves are designed specifically for extreme low-temperature environments and are core control equipment in fields such as liquefied natural gas (LNG) and cryogenic chemicals. The valve is powered by an electric actuator and achieves remote precise control by receiving 4-20mA standard signals. With the help of an intelligent positioning system, the adjustment accuracy can reach ± 0.5%. The valve body is made of low-temperature resistant austenitic stainless steel (such as 304L, 316L) or nickel based alloy. After deep cryogenic treatment, it maintains excellent strength and toughness even in ultra-low temperature environments of -196 ℃; The sealing components are made of polytetrafluoroethylene (PTFE) or low-temperature rubber material to ensure zero leakage. The unique elongated valve stem design effectively blocks low-temperature transmission and prevents the actuator from freezing and failing; The double-layer packing box structure enhances the sealing performance and avoids the loss of cooling capacity. With the advantages of fast response, low energy consumption, and high reliability, electric low-temperature regulating valves are widely used in the gasification process of LNG receiving stations and liquid nitrogen transportation systems, providing stable guarantees for the flow and pressure regulation of low-temperature fluids, and assisting in safe production and efficient operation under extreme working conditions.

Pneumatic single seat regulating valve is a key equipment in industrial fluid control systems, which uses compressed air as power to achieve precise control of medium flow rate, pressure, and liquid level. This valve adopts a single seat valve core structure with excellent sealing performance. The metal seal leakage is only 0.01% of the rated flow rate, and the soft seal can even achieve zero leakage, effectively avoiding medium overflow. During operation, the pneumatic actuator receives a 4-20mA standard signal and converts it into air pressure through a locator, driving the valve core to move up and down and quickly responding to system commands. The adjustment accuracy can reach ± 1%. Its streamlined flow channel design greatly reduces fluid resistance, has excellent flow capacity, and is resistant to high pressure, corrosion, and can adapt to harsh working conditions such as high temperature and strong corrosion. Widely used in industries such as petrochemicals, power, metallurgy, etc., in scenarios such as boiler steam pressure regulation and chemical raw material ratio control, it ensures safe and efficient operation of the production process with advantages such as strong stability, good explosion-proof performance, and easy maintenance.

Electric single seat regulating valve is a core equipment in the field of industrial automation control, known for its precise regulation and reliable performance. The valve receives 4-20mA or 0-10V electrical signals from the control system through an electric actuator, driving the single seat valve core to move up and down inside the valve body, accurately controlling fluid flow, pressure, or liquid level. Its single seat structure has excellent sealing performance, with a metal hard seal leakage rate of only 0.01% and a soft seal that can achieve zero leakage, effectively avoiding medium overflow. The valve core and seat adopt streamlined design, with low fluid resistance and strong flow capacity. Combined with an intelligent locator, high-precision adjustment of ± 0.5% can be achieved. The product is widely used in temperature control of chemical reaction vessels, steam pressure regulation of power plants, and flow management of building heating. With its fast response, remote control, and maintenance free characteristics, it significantly improves production efficiency and system stability, and is an indispensable automation component for modern industrial processes.